Cut LED strip lights Guide

LED tape lights are a very popular lighting gadget that can be utilized in homes, commercial and industrial locations. The advantages of LED light strips are that they are very energy-saving, lasting, high-brightness, rich colors, simple to install, and so on. Nevertheless, after you buy an LED strip, you may discover that it is too long and requires to be cut. So, LED strip lights how to cut?

Cut LED strip is simple, however you need to take note of some information. You require to use the right tools, cut in the ideal location, connect the right wire port, and test whether the LED strip lighting is working appropriately. If you can cut LED strip light correctly, then you can take pleasure in the beauty and functionality it brings.

Whether it is a COB LED strip lights or smd LED light strip, the cutting technique is the same. Here are the steps of LED strip lights you can cut:

Find the cutting mark: Most LED tape lighting will have a mark, normally two parallel lines.  led strip lights manufacturer  need to identify the length you desire to cut. You can utilize a ruler to determine the length you need, and after that utilize a cutting knife to cut to size LED light strips

Prepare tools: You will need - a pair of scissors, a cutting knife, - a set of pliers, a ruler and some wire connectors. These tools can help you cutting an LED strip and link them to the power supply.

Turn off LED transformer: Before cutting, ensure the LED strips are powered off to prevent unexpected brief circuits or electric shocks.

Cutting LED strip: Carefully cutting LED strip lights at the markings and attempt to keep the cutting surface flat. Please keep in mind that you can just cut at the places marked with the "Cut" sign on the LED strip lights. If you cut at the wrong location, it might harm the flexible LED strips.

Manage the cut ports: If you need to connect a new led strip or wiring, utilize the proper port or solder to deal with the cut ports and ensure a safe connection. You require to connect the wire ports. When you cut LED light strip, you need to link the wire connectors to both ends of the LED lights strip. This way, you can connecting LED strip lights to the power supply. Please keep in mind that you need to use the correct wire port to guarantee the stability and security of the connection.

Test: You require to evaluate whether the cuttable LED strips is working appropriately. When you are done cutting and connecting, you require to connecting LED strips to a source of power and test whether it is working appropriately. If cuttable LED strip is working properly, then you can install it where you need it.

Make certain to be mindful during the operation to prevent damaging the light strip or causing safety threats. If you are not acquainted with LED strip cut and link, you can refer to the light strip's directions or consult an expert.

Frequently asked questions about cutting LED strips.

1. LED strip lights where to cut?
The cutting position of the LED strip generally has apparent LED strip cut line, which are typically 2 parallel lines, marking the area where it can be safely cut. The cutting position in between each LED is usually at a certain distance, depending on the style and kind of the strips lights. Here are some typical cutting position attributes:
LED strip light cut line: 24 volt LED strip lights will be printed with the words "cut" or "cut line", or there will be two parallel lines. These marks are safe cutting positions.
LED strip light size: Generally speaking, the cutting spacing of LED light strip 12v is every 3 lamp beads, and 24v dc LED strip are every 6 LED light beads. The LED cob strip cutting spacing can discover the exact cutting position according to the specification of cob lighting strip.
Circuit design: Make sure to cut just on the LED light strip cut line when cutting, so as to avoid harming the circuit and make sure that the remaining part can still work effectively.
Water resistant LED tape light: For waterproof LED strip lights, take note of the waterproof treatment of the seams after cutting to guarantee that the cut part is not damp.

2. Can I cut LED strip light anywhere?
When utilizing smd 2835 LED strip and most cob LED tape, the cutting position is limited and should be cut at a particular cutting line, otherwise LED strip light not working. This constraint typically brings inconvenience to installation and increases the intricacy of work.
But now, the free-cut COB light strip developed by ADLED breaks this limitation! You can cut LED strip lights at any position without staying with the traditional cut line on LED strips. This ingenious design greatly streamlines the setup procedure, conserves time and energy, and makes your lighting job more flexible. You can cut this free-cut COB light strip at any position without having to find a cutting line, quickly install it, and improve work efficiency.

3. Can water resistant LED strip lights you can cut?
Water resistant light strips can likewise be cut. In general, the cutting of water resistant LED rope lights outdoor requires more actions and is more complex than the cutting of IP20 led strip. Waterproof treatment is required after cutting to guarantee that the connecting water resistant LED strips can still handle the challenges of damp environments after cutting.

3. Can you cut LED strip light sizes?
Yes, ADLED has numerous kinds of lighting strips, with various cutting lengths, size of LED strip lights including 7.58 mm, 10mm, 11mm, 25mm, 33mm, 50mm, 100mm, 166.67 mm etc 4. Can you custom size of LED strip lights?
Obviously, ADLED is a service company concentrating on personalized LED light strips. You are welcome to supply your specific needs and we will custom LED strip lights for you.

5. What should I focus on when cutting LED strip lights?
Keep in mind to cut strip lights along the LED strip lights cut line. Cutting other positions of LED lights strip may trigger LED strips to not illuminate or harm the circuit.

6. Do I need to switch off the power when cutting LED tape?
Yes, please make certain to shut off the power before cutting LED strip lights, which can efficiently prevent the risk of brief circuit or electric shock, which not only secures your personal security, but likewise assists to extend LED light strip life expectancy.

7. Can LED strips still work after LED strip cutting?
As long as you cut at the right LED strip light cutting line and properly handle the cut ports, the cuttable LED light strips must work appropriately after cutting.

8. How to manage the cutting strip lights ports?
After LED strip cut, you can choose to connect LED light strips together utilizing LED adapters or soldering to make sure a safe and secure connection. When utilizing LED ports, ensure they match the ports of tape lighting and are correctly inserted or fixed to avoid loosening. Soldering can supply a more stable connection, however it requires certain skills and tools to ensure that the solder joints are protected and there is no risk of short circuits.

9. Are there any constraints on the LED strip lights cut to length?
Each LED light strip has its own specific cutting length, which is normally plainly marked in LED strip light specs.

10. Will LED strip brightness be affected after cutting?
As long as cuttable LED strip lights is cut in the ideal position and connected properly, LED strip lights brightness brightness is usually not impacted. This implies that when cutting, always select LED strip cutting line, and make certain to use the appropriate LED port or welding technology when connecting connecting LED strips.